PBD-TV Episode 24: How to Clean Your Girsan MC28 V2

A Clean Gun Is A Safe Gun.

It is important that you keep your firearm clean. Numerous firings cause the powder residue, dirt, and gases to build up in the action and on the barrel. Over time, this can affect the performance of your gun, which can become undependable and unsure in terms of performance. Since many firearm buyers purchase their guns for self-defense, it is critical that the gun operate at peak performance every time. Clean your gun as soon as possible after firing to keep it working like new.

For a semi-automatic pistol, the chamber, side rails, slide rails, feed ramp, trigger group area, and magazine well all need cleaning. These areas are typically easy to clean and typically don’t require scrubbing unless you haven’t cleaned your gun in a while; the most carbon buildup tends to be in the feed ramp and the chamber itself. Use the toothbrush to remove any caked on carbon buildup. Clean your magazines too, especially if you’ve done quite a few reloading drills; clean inside the base plate and get the follower too. Remember to never put oil in your magazines because debris will just collect and get gunked up.

Keeping a gun clean improves its useful life and can make it last for decades. Guns that are not cleaned deteriorate fairly rapidly, so if you want to sell your gun, this will greatly lessen its value on the market. Setting time aside for cleaning is definitely worth it—a little maintenance goes a long way.

Pay a little bit of attention to your weapons. This will go a long way in preventing a whole lot of issues and prolong its life. Simple maintenance procedures can save your life and that of your loved ones.

Sign up to receive regular updates and tips on everything firearms from P.B.Dionisio & Co.

Pay a little bit of attention to your weapons. This will go a long way in preventing a whole lot of issues and prolong its life. Simple maintenance procedures can save your life and that of your loved ones.

Steps In Cleaning A Gun

1. Select a well ventilated area for cleaning

Make certain that the room you choose for cleaning has good air circulation. The reason is solvent fumes in firearms are toxic and could make you sick. Also, the room must be spacious enough to keep the parts of the gun separate. A well ventilated, spacious area will allow room for toxic pollutants to get out from the room and help you to do the job in less time.

2. Always wear an eye protection

A chemical might splash on your eyes or a spring could come off of the gun. This can be dangerous to your eyesight. So put on safety glasses first before you start with the cleaning procedure.

3. Use a tray

Many guns have tiny parts such as springs and pins. If you lose any of these parts while dissembling, you might not be able to reassemble the gun after cleaning. Using a tray will help you to not lose these tiny parts in the carpet or flooring.

4. Unload your gun

Always take some time to unload the firearm. Double check to ensure that it is unloaded each time you pick it up for cleaning. Note that your gun may still have a bullet that is ready to fire even after removing the magazine. So check it out and remove the bullet.

To do this, open the chamber and look through the barrel from back to front. Confirm that no round (bullet) remains inside, either in the chamber or stuck in the barrel. You just can't say that a particular gun is unloaded unless you have looked through the barrel thoroughly.

5. Disassemble the gun as per the instructions of the manufacturer

While disassembling firearms is not a big deal, you ought to read the manufacturer's manual in case you have any questions related to disassembling. Bending a part of your weapon is the last thing you would like to have in your mind due to ineffective disassembling. So check the instruction manual and adhere to the directions to avoid any problem while removing the parts of the gun.

6. Use the right cleaning products

Remember that cleaning firearms is not a simple chore. Also, you need special items to clean the gun properly. Never use home cleaning products for cleaning a firearm; you will end up creating a mess. Instead, buy special solutions meant for cleaning guns. In this way, you will avoid any problem and ensure that the cleaning chore is done effectively as required.

7. Clean the barrel with cotton patches and a cleaning rod

Soak the inner part of the barrel with the help of the cleaning rod, suitable cotton patches and patch holder. If possible, start from the back side of the bore. In case that is not possible, use the muzzle guard. This guard keeps the rod from hitting against the muzzle, which might eventually cause your firearm to malfunction.

To clean the barrel thoroughly, insert a solvent-soaked patch through the bore's one end until it comes out of the other end. Remove the patch from the exit end of the weapon. Do not pull it back because pulling it back will redeposit the residues you just clean off.

8. Alternate the patches and bore brush to scrub the barrel thoroughly

Next, attach the bore brush after removing the patch holder. Move the bore brush back and forth along the full length of the bore three to four times to loosen dirt and debris. Now reattach the patch holder and push cotton patches (solvent-soaked) all through the bore. Remove the patches when they come out from the front. Do this process until a cotton patch comes out completely clean. Finally, push one more patch of dry cloth and ensure that there are no debris and dirt left inside the barrel.

9. Lubricate the barrel

Apply some drops of a gun lubricant or conditioner to the cotton mop. Add this mop to the cleaning rod. Run the rod through the bore to apply a light coat of gun oil in the inner part of the barrel.

10. Clean, lubricate the action with a solvent

Put some solvent on the gun brush, and brush all of the parts of the action smoothly. Use a clean cloth to wipe and dry the parts. Next, lubricate the moving parts of the action. A light coating prevents rusting; so apply the lubricant gently.

11. Clean the magazines

When you clean your weapon, clean the magazines you have used in the last 500 rounds. This avoids jamming of bullets in magazines. Also, cleaning magazines is pretty simple and do not take much time. So make sure you clean dirt from magazines too.

12. Wipe the rest of the gun and reassemble your firearm

Use a flannel cloth that is pre-treated with a silicon lubricant to wipe the gun. This will remove any leftover debris and add shine to the weapon. Finally, assemble the parts of the gun, and test it out without a bullet to ascertain that everything is in order.

Bottom line

Properly cleaning a gun after every time it is fired is imperative. Failing to do so can hamper your shooting skills. It can also lead to some kind of undesirable accidents resulting from poorly taken shots. The good news is you can avoid any such situation by cleaning your gun properly. Aside from time, you need to put sincere efforts to clean your firearm properly. If you are really serious about cleaning and maintaining your firearm, follow the above tips and you will be able to sustain your gun in good condition.


Sign up to receive regular updates and tips on everything firearms from P.B.Dionisio & Co.

How Often Should You Clean Your Firearm

Cleaning your firearms after every time you shoot is probably impractical for most of us. Most would recommend cleaning your firearm after a certain number of rounds. Some firearms are better at functioning dirty and some ammunition leaves more debris, making your gun dirtier than others. A safe happy median would be to clean your firearm every 250 or so rounds. You can’t over clean your firearm, and if you desire to clean it every time you shoot it, you won’t be doing any harm. 

Cleaning Procedures and Safety

• Always check to make sure your gun is unloaded before cleaning.
• Inspect your gun as you clean. Check your firearms for wear and cracks when you clean. Consult a qualified gunsmith for any necessary repairs.
• Don't disassemble your gun more than necessary. Refer to owners manuals for instructions. Only disassemble gun to the point needed to reach areas where powder residue and fouling accumulate (bore, chamber, bolt, etc.).


• Use a vise to secure your firearm to save time and work.
• When using Pro-Shot 1-Step Gun Cleaner & Lubricant, let the solvent set for 15 minutes so the penetrating agents and additives can break down and lift up fouling.
• The jag is the most superior way to remove fouling from the bore because it gives the patch constant pressure against the bore when cleaning versus dragging a patch through the bore with a patch holder.
• Use the appropriate size brush or jag. Our brushes' and jags' are caliber specific.
• We recommend the use of a muzzle guard and bore guide to center rods and to reduce fouling from entering the action.

Gun Cleaning Materials

Pro-Shot 1-Step Gun Cleaner & Lubricant

This gun cleaner  / lubricant helps you remove lead, powder, plastic, & copper fouling which means you don’t have to worry about rust and corrosion on your firearm.

Pro-Shot Nylon Double End Brush

This double end nylon brush has large bristles which helps you tackle bolt carriers, cylinders, and everything else you need to scrub clean. And small brush on the other end for cleaning tight spaces. 

Pro-Shot Bore Light

This UV Bore light illuminator is a fast and easy way to check barrels for cleaning or wear. You don’t need batteries for it uses ambient light. This also fits in most handgun and rifle chambers.

Pro-Shot Pistol Rod with Muzzle Guard and Brush

This micro-polished precision stainless steel rod is strong and is hardened dense jeweled mirror like finish, this type of rod doesn’t pick up and carry abrasive grit or dirt through the bore. Which means you don’t have to worry about reaching through tight spaces along the barrel.

Pro-Shot Universal Cleaning Kit

The Pro-Shot Universal Gun Cleaning Kit has everything you need to clean a pistol, rifle, or shotgun neatly organized in a heavy duty reusable carrying/storage case.  This is perfect for 3 gun competition.

Pro-Shot Cleaning Patches

The Pro-Shot Cleaning Patches has a high thread count with tightly woven material along with our double napped on both sides creates a superior cleaning patch. It is a 100% cotton flannel fabric for purposes of absorbing foreign matter and residue, and in turn carry it through the bore with the least amount of abrasive contact to the barrel’s rifling.

Pro-Shot Cleaning Cloth

This Cleaning Cloth is a Tactical Wipe cloths that are 100% Cotton Flannel finished on both sides and are intended for wiping any excess oils from your firearm or parts during and after cleaning. Pro-Shot's Tactical Wipe Cloths are great to keep your favorite tactical gear for a handy clean cloth.

Pro-Shot Jag

This jag is a sharp pointed attachment at the end of your cleaning rod. Its major purpose is to hold the cleaning patch in place as you drive it through the barrel of your firearm for cleaning. This protects the barrel, gives you better cleaning and lubricating of the barrel.

Sign up to get to the Priority List for CZ Shadow 2  and to receive regular updates and tips on everything firearms from P.B.Dionisio & Co.

​Join our community and stay up to date with everything we do.

​stories, Photoes and PBD.TV Episodes.

Catch our PBD.TV Episodes.

​The most direct & personal way for 1-1 conversations.

Our Business Platform.

​Want to get in Touch?

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Thanks for submitting your comment!

This site uses Akismet to reduce spam. Learn how your comment data is processed.